Cost to Install a Home EV Charger in Pakistan (2026 Guide)
How much does it cost to install an EV charger at home in Pakistan in 2026? Real PKR ranges for hardware, wiring, load enhancement, and three example setups.
If you have just bought an electric car—or you are about to—one of the first questions on your mind is what it really costs to install a home EV charger in Pakistan. The honest answer is that there is no single price. The total depends on the charger you pick, how far it sits from your meter, the state of your wiring and earthing, and whether your connection can handle the extra load. Two homes on the same street can pay very different amounts.
This guide breaks the cost into plain parts so you can build a realistic budget before anyone hands you a quote. We separate the hardware cost (the charger), the installation cost (the electrician's work), and the occasional connection upgrade (load enhancement with your DISCO). We then show three worked examples—budget portable, mid-range 7 kW wallbox, and premium 22 kW three-phase—so you can see where your home lands. All figures are 2026 ranges in PKR; treat them as planning numbers and confirm the final price with your electrician and your DISCO.
The three costs that make up the total
People often ask for "the price of a charger" and assume that is the whole bill. It rarely is. Your real cost is the sum of three things:
- Charger hardware (EVSE): the portable cable or the wall-mounted box itself.
- Installation labour and materials: a dedicated line, breaker, earthing, mounting, and cable run by an electrician.
- Connection upgrade (sometimes): load enhancement or a meter change through your DISCO if your sanctioned load is too low for the charger you want.
Get a quote that lists all three. A charger advertised cheap but installed badly—or on a connection that keeps tripping—costs you more in the long run. If you are new to charging at home, our home charging guide covers how the equipment works before you spend anything.
Portable EVSE vs a wallbox
The biggest fork in the road is portable versus fixed.
A portable EVSE is the granny-style cable that plugs into a socket. Imported units start from around PKR 49,000 and are useful as a backup or for a renter who cannot drill walls. The trade-off is speed: on a standard 16A single-phase socket you get roughly 2–3 kW—an overnight top-up rather than a quick refill.
A wallbox is a fixed unit wired straight into your distribution board. A branded 7–7.4 kW wallbox typically runs PKR 220,000–350,000, while 11–22 kW units sit around PKR 300,000–450,000 and up. Local or generic wallboxes are cheaper at roughly PKR 100,000–200,000, but quality varies—check the warranty, safety certifications, and whether anyone locally can service it. See current options on our home EV chargers page.
What the electrician actually does
The installation charge is not just for "fitting a plug." A proper job includes:
- A dedicated line: the charger gets its own circuit from the distribution board, not a shared one that already runs your AC or kitchen.
- The right cable gauge: thicker copper for higher-power units so nothing overheats on a long run.
- An MCB and RCD/RCBO: the breaker and earth-leakage protection that cut power instantly if something faults.
- Proper earthing: the single most important safety item. Many older Pakistani homes have weak or missing earthing, and a charger pushing real current needs a solid earth.
- Mounting and commissioning: fixing the unit, terminating the cable cleanly, and testing under load.
Expect installation labour and basic materials (breaker, earthing, mounting, short cable run) to land around PKR 5,000–25,000. The number climbs mainly with cable length—a charger next to the meter is cheap; one across a courtyard or up to first-floor parking is not.
When you need a load enhancement
Here is where the DISCO comes in. Every domestic connection has a sanctioned load—the maximum power the utility has approved for your meter. A 7 kW wallbox draws roughly 30A on its own, so if your home already runs ACs, a pump, and a kitchen, adding that on top can exceed what your connection is rated for.
If it does, you apply for a load enhancement with your DISCO (LESCO, K-Electric, IESCO, MEPCO, and so on). Cost and timeline vary by region and by how much extra load you request, and a higher load may move you into a different tariff slab, so ask before you commit. A meter upgrade may be part of this.
This is also where single-phase versus three-phase matters. Most homes are single-phase, which comfortably supports up to about a 7.4 kW charger. To run an 11–22 kW unit at full speed you generally need a three-phase connection, which unlocks much faster charging but usually means a load enhancement and a three-phase meter. For most owners, a 7 kW single-phase wallbox is the sweet spot—a full overnight charge with no connection drama.
Adding solar to the mix
Many Pakistani EV owners pair charging with solar, and for good reason. With load-shedding still a reality in parts of the country, a solar-plus-battery setup lets you charge during outages and cut running costs by drawing from panels in daytime. It is an optional add-on, not part of the charger install, and a meaningful separate investment—but if you are already planning solar, size it to cover EV charging up front. If you are still weighing whether an EV pays off, our petrol vs electric comparison runs the numbers.
The cost table
The table below lists the typical line items and three example total setups. Ranges are wide on purpose; your quote depends on distance, wiring, and your DISCO.
| Line item | Typical range (PKR) | Notes |
|---|---|---|
| Portable EVSE (granny cable) | 49,000+ | Plugs into a socket; ~2–3 kW |
| Local/generic wallbox | 100,000–200,000 | Check warranty and service |
| Branded 7–7.4 kW wallbox | 220,000–350,000 | Best single-phase sweet spot |
| 11–22 kW wallbox | 300,000–450,000+ | Needs three-phase for full speed |
| Installation labour + basics | 5,000–25,000 | Line, breaker, RCD, earthing, mounting |
| Load enhancement / meter upgrade | Varies by DISCO | Only if sanctioned load is too low |
| Solar add-on (optional) | Separate investment | Sized to cover charging |
Three example total setups:
- Budget portable: PKR 49,000+ for the EVSE, plus a small charge to fit a proper industrial socket and check earthing. Roughly PKR 55,000–80,000 all in. Slow but workable.
- Mid 7 kW wallbox: PKR 220,000–350,000 hardware + PKR 5,000–25,000 install. Roughly PKR 230,000–375,000, assuming no load enhancement. The default choice for most homes.
- Premium 22 kW three-phase: PKR 300,000–450,000+ hardware + heavier install + a three-phase load enhancement. Realistically PKR 350,000–500,000+ before any DISCO fees—fastest home charging available.
Honest notes before you pay
First, dealers sometimes bundle a charger with the car—great, but ask which unit it is and whether installation is included or quoted separately. A free portable cable is not the same as a fitted 7 kW wallbox. Second, always get a full written quote covering hardware, installation, and any expected DISCO costs, not just a headline price. Third, your running cost is separate: home charging energy works out to roughly PKR 36–60/kWh depending on your tariff slab—still far cheaper per kilometre than petrol. For where EVs are headed locally, see our electric & hybrid cars hub and the latest EV incentives & policy.
Frequently Asked Questions
Is installation included in the charger price?
Usually not. The price you see online or from a dealer is almost always for the hardware only. Installation—the dedicated line, breaker, earthing, and mounting—is a separate PKR 5,000–25,000 depending on cable run, and any load enhancement is extra. Always ask for an itemised quote so there are no surprises.
Do I need to upgrade my electricity connection?
Maybe. It depends on your sanctioned load and what else your home runs. A 7 kW wallbox draws about 30A, so if your connection is already near its limit you will likely need a load enhancement from your DISCO. For full-speed 11–22 kW charging you generally need a three-phase connection. Your electrician can check your load before you buy.
Can I just use a normal wall socket?
For a portable EVSE, yes—but with caution. A standard socket and its wiring may not be rated for hours of continuous current, so the safer option is a dedicated industrial socket with proper earthing, fitted by an electrician. Avoid using extension boards or old, loose sockets, which can overheat. A fixed wallbox is safer and faster for daily use.
How long does the installation take?
A straightforward wallbox install near the meter often takes a few hours to a day once the hardware is on site. Longer cable runs, panel upgrades, or fresh earthing add time. The bigger delay is usually the DISCO load enhancement, which can take days to weeks, so start that paperwork early if you need it.
Which charger should most people in Pakistan choose?
For the majority of homes, a 7–7.4 kW single-phase wallbox is the sweet spot: it fully charges most EVs overnight, works on a standard connection, and avoids the cost and wait of a three-phase upgrade. Go portable only as a backup, and go three-phase only if you genuinely need the fastest possible home charging.